Renaming container create command to container build.

Signed-off-by: Daniel Baumann <daniel.baumann@open-infrastructure.net>

1 files changed, 173 insertions, 0 deletions

diff --git a/share/man/container-build-debconf.1.rst b/share/man/container-build-debconf.1.rst
new file mode 100644
index 0000000..1649071
--- /dev/null
+++ b/share/man/container-build-debconf.1.rst
@@ -0,0 +1,173 @@
+.. Open Infrastructure: compute-tools
+
+.. Copyright (C) 2014-2021 Daniel Baumann <daniel.baumann@open-infrastructure.net>
+..
+.. SPDX-License-Identifier: GPL-3.0+
+..
+.. This program is free software: you can redistribute it and/or modify
+.. it under the terms of the GNU General Public License as published by
+.. the Free Software Foundation, either version 3 of the License, or
+.. (at your option) any later version.
+..
+.. This program is distributed in the hope that it will be useful,
+.. but WITHOUT ANY WARRANTY; without even the implied warranty of
+.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+.. GNU General Public License for more details.
+..
+.. You should have received a copy of the GNU General Public License
+.. along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+=======================
+container-build-debconf
+=======================
+
+-----------------------------------------------------
+Build an advanced Debian based container with debconf
+-----------------------------------------------------
+
+:manual section: 1
+:manual group: Open Infrastructure
+
+Synopsis
+========
+
+| **container build -s debconf** ['OPTIONS']
+| **cnt b -s debconf** ['OPTIONS']
+
+| **container build -s debian** ['OPTIONS']
+| **cnt b -s debian** ['OPTIONS']
+
+| **container build -s progress-linux** ['OPTIONS']
+| **cnt b -s progress-linux** ['OPTIONS']
+
+Description
+===========
+
+The debconf container build script uses debconf(1) to automatically build a
+Debian based container.
+
+Scope
+-----
+
+Note that this container build script can do a few things more than just
+automatically debootstrap based on a preseed file. It also allows you to set a
+root password, configure the network, install certain packages and execute
+hooks.
+
+But: this is *not* a replacement for a configuration management system (like
+ansible, puppet, etc.). The intenion of this script is to build the initial
+container to that extend that a configuration management system can take over.
+
+As an analogy, think of debian-installer: d-i sets up your system to make it
+ready to boot and connect to the network. Everything after that is out of scope.
+Same goes for this script.
+
+Functions
+---------
+
+This script performs the following configuration on top of a Debian based
+system:
+
+  * network
+  * root password
+  * apt repositories
+  * \.\.\.
+
+Modes
+-----
+
+This container build script can be used under two different names: debian and
+progress-linux.
+
+Alternative, calling it under the debconf name is equal to the debian mode.
+
+Preseeding
+----------
+
+Hierarchy of Preseed Files:
+
+  * The debconf script can be fully preseeded. Such preseed files can include
+    one or more preseed files themselfs (currently, only one layer of includes
+    is supported, no nested or recursive includes).
+
+  * The general rule of 'the later preseed file overwrites the earlier' applies.
+    The debconf script reads the main preseed file (specified either on command
+    line or by debconf selection/input dialog) after any included preseed files
+    in there.
+
+  * That means that debconf values after the include statement in the main
+    preseed file can overwrite any values specified in the included preseed
+    files.
+
+Options
+=======
+
+The following script options are available:
+
+-n, --name='NAME':
+  Specify container name.
+
+-p, --preseed-file='FILE':
+  Specify the preseed file.
+
+Examples
+========
+
+Build a Debian based container:
+
+  sudo container build -s debian -n debian.example.net
+
+Build a Progress Linux container:
+
+  sudo container build -s progress-linux -n progress.example.net
+
+Files
+=====
+
+The following files are used:
+
+/etc/compute-tools/config:
+  Container configuration files.
+
+/usr/share/compute-tools/build-scripts:
+  Container build scripts.
+
+/usr/share/doc/compute-tools:
+  Container documentation.
+
+/var/lib/machines:
+  Container directory.
+
+/var/cache/container:
+  Container cache directory.
+
+/tmp/compute-tools:
+  Container temporary directory.
+
+See also
+========
+
+| compute-tools(7),
+| container(1).
+
+Homepage
+========
+
+More information about compute-tools and the Open Infrastructure project can be
+found on the homepage (https://open-infrastructure.net).
+
+Contact
+=======
+
+Bug reports, feature requests, help, patches, support and everything else are
+welcome on the Open Infrastructure Software Mailing List
+<software@lists.open-infrastructure.net>.
+
+Debian specific bugs can also be reported in the Debian Bug Tracking System
+(https://bugs.debian.org).
+
+Authors
+=======
+
+compute-tools were written by Daniel Baumann
+<daniel.baumann@open-infrastructure.net> and others.